Chongqing Huafu Building Materials Co

Tel: < > (1) Wear-resistant hardened floor
< >Surface form: glossy
< >Floor features: Metal type: extremely high wear resistance, permanent corrosion resistance, and impact resistance , reduce dust, anti-static, non-flammable.
Non-metallic type: has extremely high wear resistance, reduces dust, and has good impact resistance.
< >Scope of application: Metal type: warehouses, dock loading and unloading areas, garages, parking lots, oil depots, bridge decks, military enterprises, automobile industry, electronics industry, etc.
Non-metal type: warehouses, docks, factories, parking lots, warehouse-style shopping malls, etc.
< >Construction technology: Plain treatment: Use sandblasting or grinding to create a rough surface, clean it, and fully moisten it with water
Concrete leveling layer: Use concrete with a strength of above, and pour a thickness of above Fine stone concrete with cement mortar or above
Diamond sand layer: first spread the hardener (metallic aggregate or non-metallic aggregate) evenly, let the material fully absorb the water in the concrete, and then smooth it with a troweling machine. Spread the remaining hardener evenly and smooth it. When the concrete is not damaged, smooth it out and polish it
Curing layer: Smooth it out and apply a layer of curing layer immediately after polishing
Construction is completed: no one can enter the building after 1 hour or 10 hours later. Heavy pressure, (according to the standards, the low temperature opening time needs to be appropriately extended)
< > (2) Concrete sealing and curing agent floor
< >Applicable places: used for indoor and outdoor emery wear-resistant floors, terrazzo floors It is suitable for factory workshops, warehouses, shopping malls, supermarkets, docks, airport runways, bridges, highways and other cement-based places on base surfaces such as flat floors, raw pulp polished floors, super flat floors, ordinary cement floors, and stone.
< >Functional features: sealed and dust-proof, hardened and wear-resistant, permanent gloss, good anti-aging properties, convenient construction, environmentally friendly process (colorless, odorless) to reduce maintenance costs, one-time construction, permanent protection.
< >Construction method: Clean the base surface, remove floating ash, oil and other substances that are not conducive to bonding. If there are too many potholes in the old base, they need to be filled up in advance. Measure the amount of high-penetration sealing curing agent according to the construction area. .
< >Pour the high-penetration sealing curing agent evenly on the ground and let it flow freely. At the same time, you can use a trowel to gently scrape the entire ground to evenly penetrate it. When the base surface becomes slippery due to the penetration reaction, moisten the sticky surface with water mist. Allow the high-penetration sealing curing agent to continue the penetrating reaction.
< >Observe the density and penetration of the base surface, and apply the high-penetration sealing curing agent on the ground three times or more.
< >After the penetration reaction of the base surface is complete (it is better if the surface moisture is not completely dry), use a professional floor cleaning machine to clean the surface and remove excess material.
< >. Hours after completion, use a soft-bristled polishing pad to polish the floor surface. It is necessary to use resin polishing discs to polish the base surface multiple times. The longer it is used, the better the gloss will be.